11. 7 CHAPTER VII: (7.1) Rourk, R. and W. Young, Formulas for Stress and Strain, 5th ed., McGraw-Hill Book Company, New York, 1975. (7.2) Maiden, C. J., A. R. McMillian, and R. F. Sennett, "Thin Sheet Inpact", GM Defense Laboratories, Nov. 1964 TR64-61. (7.3) "Investigation of Meteoroid Impacts on Two Sheet Configurations", North American Aviation Inc., Nov. 1965, AFFDL-TR-65-196. (7.4) Cosby, W. A., and R. G. Lyle, The Meteoroid Environment and its Effect on Materials and Equipment, NASA SP-78, 1965. (7. 5) "Ausform Fabrication and Properties of High Strength Alloy Steel", Gesberich, Williams, Martin, Heise, ASTM STP 370. (7.6) Personal Communication from Dr. J. Kula, Army Materiel Command, Watertown Arsenal, Watertown, Mass., March 1976. (7.7) Masubuchi, K., Ocean Engineering Materials, MIT Press. (7.8) Personal Communication, Professor K. Masubuchi, Department of Ocean Engineering, MIT, April 1976. (7.9) Blocher, J.M., Jr., et al., Vapor Deposition, John Wiley and Sons, New York, 1966, Chap. 20. (7.10) The International System of Units, Physical Constants and Factors, Second Revision, Mechtly, ed., NASA SP-7012. (7.11) Timoshenko, S. and S. Woinowsky-Krieger, Theori of Plates and Shells, Second Edition (Engineering Societies Monographs), McGraw-Hill Book Company, New York, 1959. (7.12) Tetelman, A. S. and McEvily, A. J., Jr., Fracture of Structural Materials, John Wiley and Sons, Inc., New York, 1967, Chapters 1 and 2. (7.13) Campbell, J. D., et al., Damage Tolerant Design Handbook'. MClC-HB-01 Battelle, Columbus Laboratories, Columbus, Ohio, Sept. 1973. (7.14) Personal Communication with Dr. 0. Orringer, Assistant Director, MIT ASRL, March 1976. (7.15) MIL-A-8344 (USAF) 3.1.1.lb Initial Flaw Size.
RkJQdWJsaXNoZXIy MTU5NjU0Mg==