11.8 (7.16) Tada, H., P. Paris, and G. Irwin, The Stress Analysis of Cracks Handbook, Del Research Corp., Hellertown, Pa., 1973. (7.17) Peery, D. J., Aircraft Structures, McGraw-Hill Book Company, New York, 1950, Chapter 12. (7.18) Handbook of Engineering Fundamentals, Eshbach, 0. W. and M. Souders, eds., Third Edition, John Wiley and Sons, New York, p. 1490. (7.Al) Timoshenko, S. and Woinowsky-Krieger, S., Theory of Plates and Shells, Second Edition, (Engineering Societies Monographs), McGraw-Hill Book Company, New York, 1959. (7.Cl) Maiden, C. J., McMillian, A. R., Sennett, R. E., Thin Sheet Impact, G.M. Defense Laboratories, Nov. 1964, TR64-61. (7.C2) Posevar, F. C., and C. N. Scully, Investigation of Meteroid Impacts on Two Sheet Configurations, North American Aviation Inc., Nov. 1965, AFFDL-TR-65-196. (7.C3) Handbook of Engineering Fundamentals, Eshbach, 0. W., and M. Souders, eds., John Wiley and Sons, New York, 1975. (7.Dl) Campbell, J. D., et al., Damage Tolerant Design Handbook, MClC-HB-01, Batelle, Columbus Laboratories, Columbus, Ohio, Sept. 1973. (7.D2) Tada, H., P. Paris, and G. R. Irwin, The Stress Analysis of Cracks Handbook, Del Research Corp., Hellertown, Pa. 1973. (7.El) Handbook of Engineering Fundamentals, O. W. Eshbach, and M. Souders, eds., Third Edition, John Wiley and Sons, New York, 1975. (7.Fl) Wang, Chi-Teh, Applied Elasticity, McGraw-Hill Book Co., New York, 1953, pp.157-162. (7.F2) Timoshenko, S. and S. Woinowsky-Krieger, Theory of Plates and Shells, Second Edition (Engineering Societies Monographs), McGraw-Hill Book Company, New York, 1959. (7.Hl) Fliigge, Stresses in Shells, Springer-Verlag, Berlin, 1960.
RkJQdWJsaXNoZXIy MTU5NjU0Mg==