TABLE 1 INSERTION LOSS OF THE CIRCUIT Fig. 11. Higher harmonic rejection filter (HHRF). 8-ELEMENT RECTENNA MODULE Figure 12(a) shows the front view of the rectenna where 8 CMS As with slits are photoetched. The back views of the rectenna are shown in (b)-(d) of Fig. 12 where the following three types of circuits are printed: Type 1: Each output of the upper and lower rows (composed of four elements) is rectified by each bridge of the back side, then each DC output is combined. Type 1 has no input HHRF. Type 2: Each output of 8 CMSAs with slits is rectified by each rectifying circuit without the input HHRF. Type 3: Each output of 8 CMSAs with slits is rectified by each rectifying circuit with the input HHRF. This type of rectenna corresponds to the rectenna shown in the block diagram of Fig. 1.
RkJQdWJsaXNoZXIy MTU5NjU0Mg==